СМА gorenje WA 50100, Код ошибки

@kityzmigG · Регистрация: 06.04.2010

Author24 — интернет-сервис помощи студентам

Какой код ошибки? 5 миганий три светодиода напротив трьох кнопок.

@ФИЛЕКЗ · 18.04.2013, 22:44

F5 the triac is short-circuited
The failure is set, if the washing program is
active and the motor is working without control of triac. The washing program is stopped
immediately. After 2 minutes try again. If the failure is not present, than forget the first
failure and continue work. If it is the same failure again, than program stops complete. If the
temperature is higher than 60°C than cool down with cold water 30 seconds. Then pumping water 2
minutes. STOP the program. The failure will be displayed.

@kityzmigG · 18.04.2013, 22:46

Сообщение от ФЕЛИКС

F5 the triac is short-circuited
The failure is set, if the washing program is
active and the motor is working without control of triac. The washing program is stopped
immediately. After 2 minutes try again. If the failure is not present, than forget the first
failure and continue work. If it is the same failure again, than program stops complete. If the
temperature is higher than 60°C than cool down with cold water 30 seconds. Then pumping water 2
minutes. STOP the program. The failure will be displayed.

А я думаю чё так движок быстро крутит
Спасибо огромное!

@kityzmigG 0 / 0 / 0 Регистрация: 06.04.2010 Сообщений: 302
		1
	СМА gorenje WA 50100, Код ошибки 18.04.2013, 22:36. Показов 4503. Ответов 2 Метки нет (Все метки) Какой код ошибки? 5 миганий три светодиода напротив трьох кнопок. 0

@ФИЛЕКЗ 0 / 0 / 0 Регистрация: 14.03.2011 Сообщений: 82
	18.04.2013, 22:44	2
	F5 the triac is short-circuited The failure is set, if the washing program is active and the motor is working without control of triac. The washing program is stopped immediately. After 2 minutes try again. If the failure is not present, than forget the first failure and continue work. If it is the same failure again, than program stops complete. If the temperature is higher than 60°C than cool down with cold water 30 seconds. Then pumping water 2 minutes. STOP the program. The failure will be displayed. 0

@kityzmigG 0 / 0 / 0 Регистрация: 06.04.2010 Сообщений: 302
	18.04.2013, 22:46	3
	Сообщение от ФЕЛИКС F5 the triac is short-circuited The failure is set, if the washing program is active and the motor is working without control of triac. The washing program is stopped immediately. After 2 minutes try again. If the failure is not present, than forget the first failure and continue work. If it is the same failure again, than program stops complete. If the temperature is higher than 60°C than cool down with cold water 30 seconds. Then pumping water 2 minutes. STOP the program. The failure will be displayed. А я думаю чё так движок быстро крутит Спасибо огромное! 0