Сбоит SSD или материнская плата?

@Ayris · Регистрация: 19.10.2011

Author24 — интернет-сервис помощи студентам

У меня стоит SSD OCZ Agility3 на 240 Гб.
На нём у меня - одна игрушка, которая критична к скорости произвольного доступа к файлам. Система - на жестком диске.
Вскоре после того, как я его купил, начались проблемы. Ни с того, ни с сего, компьютер начинает подвисать, в просмотре событий появляются разные нехорошие записи - disk, atapi и т.д. Если SSD висит на SATA2, то это происходит раз месяца в два. Но если перевесить его на SATA3, то по два раза в неделю.
В просмотре событий - роман "Война и мир" таких записей:
atapi - Устройство \Device\Ide\IdePort0 не отвечает в течение интервала ожидания.
disk - Обнаружена ошибка на устройстве \Device\Harddisk0\D во время выполнения операции страничного обмена.
Если набрать эти фразы в поисковиках, то увидишь очень нехорошие вещи, страшно, аж жуть.
Более того, после каждого такого сбоя он сбрасывается в режим PIO, в результате, при любом действии с диском компьютер начинает тормозить, мышка двигается рывками. Надо ли говорить, что все преимущества SSD идут коту под хвост. А значит - перезагрузка, потом ещё перезагрузка.
Меня это уже конкретно задолбало!
Что это может быть - сбоит именно SSD или всё-таки материнка? И может ли SSD "медленно убивать" материнку?
Дело в том, что "Просмотр событий", бывает, ругается не на него, а на CD-ROM, на другие диски. Бывает, что один из жестких дисков начинает странно рычать. И, уже дорычался - на нём появился битый блок. Два раза было, что компьютер не загружался, зависал на заставке БИОСа. Откроешь системник, подергаешь разъемы, рычание прекращается, некоторое время всё работает нормально. До установки SSD такого не было. Было на старой материнке, два года мучался с точно такими же проблемами, пока эта материнка не крякнула. Новая проработала меньше года, именно до установки SSD.
Где-то тут прочитал, что часто бывают виноваты разъемы и переходники. Ну, без переходников по питанию - никак. Я уж в них контакты поподгибал. Вроде, какое-то время нормально проработало. Но опять недолго.

Добавлено через 42 минуты
Смарт:

Код

smartctl 6.0 2012-10-10 r3643 [i686-w64-mingw32-xp-sp3] (sf-6.0-1)
Copyright (C) 2002-12, Bruce Allen, Christian Franke, [url]www.smartmontools.org[/url]

=== START OF INFORMATION SECTION ===
Model Family:     SandForce Driven SSDs
Device Model:     OCZ-AGILITY3
Serial Number:    OCZ-33X5990D9352JJUG
LU WWN Device Id: 5 e83a97 e2b259e8b
Firmware Version: 2.15
User Capacity:    240*057*409*536 bytes [240 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA8-ACS, ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
Local Time is:    Sat May 11 23:06:56 2013 
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is:   Unavailable
APM level is:     254 (maximum performance)
Rd look-ahead is: Disabled
Write cache is:   Enabled
ATA Security is:  Disabled, frozen [SEC2]

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		( 2097) seconds.
Offline data collection
capabilities: 			 (0x7f) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Abort Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  48) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x0021)	SCT Status supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  1 Raw_Read_Error_Rate     POSR--   120   120   050    -    0/0
  5 Retired_Block_Count     PO--CK   100   100   003    -    5
  9 Power_On_Hours_and_Msec -O--CK   098   098   000    -    2051h+19m+28.750s
 12 Power_Cycle_Count       -O--CK   100   100   000    -    265
171 Program_Fail_Count      -O--CK   000   000   000    -    2
172 Erase_Fail_Count        -O--CK   000   000   000    -    3
174 Unexpect_Power_Loss_Ct  ----CK   000   000   000    -    109
177 Wear_Range_Delta        ------   000   000   000    -    1
181 Program_Fail_Count      -O--CK   000   000   000    -    2
182 Erase_Fail_Count        -O--CK   000   000   000    -    3
187 Reported_Uncorrect      -O--CK   100   100   000    -    0
194 Temperature_Celsius     -O---K   030   030   000    -    30 (Min/Max 30/30)
195 ECC_Uncorr_Error_Count  --SRC-   100   100   000    -    0/0
196 Reallocated_Event_Count PO--CK   100   100   003    -    5
201 Unc_Soft_Read_Err_Rate  --SRC-   100   100   000    -    0/0
204 Soft_ECC_Correct_Rate   --SRC-   100   100   000    -    0/0
230 Life_Curve_Status       PO--C-   100   100   000    -    100
231 SSD_Life_Left           PO--C-   100   100   010    -    0
233 SandForce_Internal      ------   000   000   000    -    1263
234 SandForce_Internal      -O--CK   000   000   000    -    1219
241 Lifetime_Writes_GiB     -O--CK   000   000   000    -    1219
242 Lifetime_Reads_GiB      -O--CK   000   000   000    -    2238
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning

General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
GP    Log at address 0x07 has    1 sectors [Extended self-test log]
SMART Log at address 0x09 has    1 sectors [Selective self-test log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error log]
GP/S  Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0xb7 has   16 sectors [Device vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]

SMART Extended Comprehensive Error Log (GP Log 0x03) not supported

SMART Error Log not supported

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       0 (0x0000)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    30 Celsius
Power Cycle Min/Max Temperature:     30/30 Celsius
Lifetime    Min/Max Temperature:     30/30 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         0 minutes
Temperature Logging Interval:        0 minutes
Min/Max recommended Temperature:      ?/ ? Celsius
Min/Max Temperature Limit:            ?/ ? Celsius
Temperature History Size (Index):    478 (1)

Index    Estimated Time   Temperature Celsius
   2    2013-05-11 15:09     ?  -
 ...    ..(476 skipped).    ..  -
   1    2013-05-11 23:06     ?  -

SCT Error Recovery Control command not supported

Device Statistics (GP Log 0x04) not supported

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS
0x0008  2            0  Device-to-host non-data FIS retries
0x0009  2            3  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2            4  Device-to-host register FISes sent due to a COMRESET
0x000f  2            0  R_ERR response for host-to-device data FIS, CRC
0x0010  2            0  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2            0  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2            0  R_ERR response for host-to-device non-data FIS, non-CRC
0x0002  2            0  R_ERR response for data FIS
0x0005  2            0  R_ERR response for non-data FIS
0x000b  2            0  CRC errors within host-to-device FIS
0x000d  2            0  Non-CRC errors within host-to-device FIS

	12.05.2013, 01:17