На Raspberry Pi 4 не работает монитор HDMI

pi@raspberrypi:~ $ lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 023: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
Bus 001 Device 022: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
Bus 001 Device 021: ID 214b:7250  
Bus 001 Device 004: ID 32e4:9530  
Bus 001 Device 011: ID 2aad:6373  
Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

pi@raspberrypi:~ $ uhubctl
Current status for hub 2 [1d6b:0003 Linux 5.10.60-v7l+ xhci-hcd xHCI Host Controller 0000:01:00.0, USB 3.00, 4 ports, ppps]
  Port 1: 02a0 power 5gbps Rx.Detect
  Port 2: 02a0 power 5gbps Rx.Detect
  Port 3: 02a0 power 5gbps Rx.Detect
  Port 4: 02a0 power 5gbps Rx.Detect
Current status for hub 1-1 [2109:3431 USB2.0 Hub, USB 2.10, 4 ports, ppps]
  Port 1: 0507 power highspeed suspend enable connect [2aad:6373 Intel Intel F450 00.00.01]
  Port 2: 0507 power highspeed suspend enable connect [32e4:9530 HD USB Camera HD USB Camera 2020042508]
  Port 3: 0503 power highspeed enable connect [214b:7250 USB2.0 HUB, USB 2.00, 4 ports, ganged]
  Port 4: 0100 power
Current status for hub 1 [1d6b:0002 Linux 5.10.60-v7l+ xhci-hcd xHCI Host Controller 0000:01:00.0, USB 2.00, 1 ports, ppps]
  Port 1: 0503 power highspeed enable connect [2109:3431 USB2.0 Hub, USB 2.10, 4 ports, ppps]

pi@raspberrypi:~ $ sudo dmesg --level=err
[    8.207831] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    8.476640] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    8.476756] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[    8.486238] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan  4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e
[   11.837644] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[   12.357167] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[  297.210679] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 5724.846524] v3d fec00000.v3d: MMU error from client L2T (0) at 0x17e1000, pte invalid

pi@raspberrypi:~ $ cat /var/log/Xorg.0.log | grep HDMI
[    11.789] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1024x600M@60 smsc95xx.macaddr=E4:5F:01:9B:0B:B8 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=tty1 root=PARTUUID=826e4de8-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    13.393] (II) modeset(0): Output HDMI-1 has no monitor section
[    13.394] (II) modeset(0): EDID for output HDMI-1
[    13.394] (II) modeset(0): Printing probed modes for output HDMI-1
[    13.394] (II) modeset(0): Output HDMI-1 connected
[    13.394] (II) modeset(0): Output HDMI-1 using initial mode FIXED_MODE +0+0

pi@raspberrypi:~ $ xrandr
Screen 0: minimum 320 x 200, current 600 x 1024, maximum 7680 x 7680
HDMI-1 connected primary 600x1024+0+0 right (normal left inverted right x axis y axis) 0mm x 0mm
   FIXED_MODE    59.85*+

pi@raspberrypi:~ $ tvservice -s
state 0x6 [DVI DMT (88) RGB full 16:9], 1024x600 @ 60.00Hz, progressive

pi@raspberrypi:~ $ sudo ddcutil detect --verbose
Output level:               Verbose
Reporting DDC data errors:  false
Trace groups active:        none
Traced functions:           none
Traced files:               none
Force I2C slave address:    false
 
No displays found

pi@raspberrypi:~ $ sudo ddcutil getvcp known --bus 6
No monitor detected on I2C bus /dev/i2c-6

pi@raspberrypi:~ $ sudo ddcutil usbenv
The following tests probe for USB connected monitors.
 
Checking for USB connected monitors...
 
   Using lsusb to summarize USB devices...
      Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
      Bus 001 Device 002: ID 2109:3431 VIA Labs, Inc. Hub
      Bus 001 Device 004: ID 32e4:9530  
      Bus 001 Device 011: ID 2aad:6373  
      Bus 001 Device 021: ID 214b:7250  
      Bus 001 Device 022: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
      Bus 001 Device 023: ID 1a86:7523 QinHeng Electronics HL-340 USB-Serial adapter
      Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
 
   USB device toplogy...
      /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
      /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/1p, 480M
          |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
              |__ Port 1: Dev 11, If 3, Class=CDC Data, Driver=cdc_acm, 480M
              |__ Port 1: Dev 11, If 1, Class=Video, Driver=uvcvideo, 480M
              |__ Port 1: Dev 11, If 2, Class=Communications, Driver=cdc_acm, 480M
              |__ Port 1: Dev 11, If 0, Class=Video, Driver=uvcvideo, 480M
              |__ Port 2: Dev 4, If 0, Class=Video, Driver=uvcvideo, 480M
              |__ Port 2: Dev 4, If 1, Class=Video, Driver=uvcvideo, 480M
              |__ Port 3: Dev 21, If 0, Class=Hub, Driver=hub/4p, 480M
                  |__ Port 1: Dev 22, If 0, Class=Vendor Specific Class, Driver=ch341, 12M
                  |__ Port 3: Dev 23, If 0, Class=Vendor Specific Class, Driver=ch341, 12M
 
   Listing /dev/usb...
      ls: cannot access '/dev/usb': No such file or directory
 
   Listing /dev/hiddev*...
      ls: cannot access '/dev/hiddev*': No such file or directory
 
   Listing /dev/bus/usb...
      total 0
      drwxr-xr-x 2 root root 180 May 12 16:47 001
      drwxr-xr-x 2 root root  60 Jan  1  1970 002
 
   Listing /dev/hidraw*...
      ls: cannot access '/dev/hidraw*': No such file or directory
 
 
Checking for USB HID devices using hiddev...
   Found 0 USB HID devices.
 
Checking for USB HID Report Descriptors in /sys/kernel/debug/hid...