При настройке ssh на 2950 получаю маркер ошибки - Cisco - Ответ 16195510

RT-2#sh version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(9)EA1, RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 24-Apr-02 06:57 by antonino
Image text-base: 0x80010000, data-base: 0x804E8000

ROM: Bootstrap program is CALHOUN boot loader

RT-2 uptime is 16 minutes
System returned to ROM by power-on
System image file is "flash:c2950-i6q4l2-mz.121-9.EA1.bin"

cisco WS-C2950-24 (RC32300) processor (revision E0) with 20815K bytes of memory.
Processor board ID FOC0625W1Y3
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0A:41:1F:16:40
Motherboard assembly number: 73-5781-10
Power supply part number: 34-0965-01
Motherboard serial number: FOC06250FHY
Power supply serial number: DAB06244UET
Model revision number: E0
Motherboard revision number: B0
Model number: WS-C2950-24
System serial number: FOC0625W1Y3
Configuration register is 0xF

Switch(config)# enable password cisco

Switch(config)# line vty 0 15
Switch(config-line)#password cisco
Switch(config-line)# login
Switch(config)# exit

Switch(config)# service password-encryption


Switch(config)# hostname RT-2


RT-2(config)# interface vlan 1
RT-2(config-if)# ip address 192.168.0.11 255.255.255.0
RT-2(config-if)# exit


RT-2(config)# no ip domain-lookup

RT-2(config)# ip domain-name RT-2

RT-2(config)# interface range Fa0/1 - 24
  switchport mode trunk
  switchport nonegotiate 
  speed 100
  load-interval 60
  spanning-tree portfast trunk


RT-2(config)# no ip http server

RT-2(config)# ip default-gateway 192.168.0.1

RT-2# wri

----------------ssh----------------
RT-2(config)# aaa new-model
RT-2(config)# access-list 23 permit 192.168.0.0 0.0.0.255
RT-2(config)# crypto key generate rsa modulus 1024
RT-2(config)# ip ssh version 2
RT-2(config)# username root secret cisco
RT-2(config)# line vty 0 4
RT-2(config-line)# login local
RT-2(config-line)# transport input ssh
RT-2(config-line)# logging synchronous
RT-2(config-line)# privilege level 15
RT-2(config-line)# exit
RT-2(config)# exit
RT-2# wri